22
5.2.6.
Information about the M2MTalk server connection settings
If the SMS message
m2mtalk
without any parameters is sent, the modem will send back the SMS
message with information about the M2MTalk server connection settings.
The command
m2mtalk
The command for reading of information about the M2MTalk server
connection settings.
An example of the response message
Enabled='yes' Autologin='yes'
Address='1234' User='usr'
Password='psw'Server='example.com'
Port='9999'
Information about the M2MTalk
server connection settings.
5.2.7.
Setting of the M2MTalk server connection
The first word of the message must always be
m2mtalk
. After this keyword, parameter values for
an actual setting follows in specific order:
m2mtalk [
enabled
] [
autologin
] [
address
] [
user
] [
password
] [
server
] [
port
]
If the trailing parameter values are not entered, they will be unchanged. Don’t enter the square
brackets in the SMS message. Individual items of the message must be separated by spaces. The
parameters are optional „from the back“. If any parameter isn’t entered, it will not be changed. The
meaning of the parameters is following:
enabled
enable the communication via M2MTalk server (
yes/no
)
autologin
automatic login on the server after switching on the modem (
yes/no
)
address
the modem address (a number value)
user
the user name for login (a text)
password
the password for login (a text)
server
the M2MTalk server name or IP address (a text)
port
the port number (a number value)
If the modem accepts the command, the SMS message will be sent back. And if the modem was
logged on the M2MTalk server, the modem will be restarted automatically.
An example of the command with parameters
m2mtalk yes no 2006 2006 mypsw
The communication via M2MTalk
server will be enabled, automatic
login after switching on will be
deactivated, address will be 2006,
user name will be 2006 and the
password will be mypsw. The M2MTalk
server name or IP address and the
port number stay unchanged.
The response message
M2MTalk server parameters were set and
stored
All parameters were set and stored
correctly.
An error occurred while setting M2MTalk
server parameters
An error occurred during setting
the parameters. Their saving didn’t
succeed.
