4
Functions and settings available from menu
Press MENU key to enter mode of viewing menu items one by one. Press arrow keys up and down
to list all menu items. Press MENU key again to return to default mode (displaying of actual
measured values).
Pressing the ENTER key enables to enter the mode of setting alarm limits
for all quantities (see below).
This item indicates if audio signaling of alarm indication is switched on
(On) or switched off (OFF). Press ENTER key to change actual setting.
Notice: if the battery voltage is low, audio indication is out of operation to
reduce current consumption independently on this selection.
Clearing of minimum and maximum memory of all values. Memory is
cleared after pressing ENTER key. Clearing is confirmed by reading YES
on the LCD lower display.
Press ENTER key to display values stored in the HOLD memory. Press
DISPLAY key to display other stored values (dew point temperature).
Press MENU key to leave this mode.
Battery voltage of partially loaded battery is displayed. This value
illustrates battery condition.
Display refresh mode is indicated. In the FAST mode refreshment is fastest
with regular interval approximately 0.7 s. In the dynamic refresh mode
(DYN.) each 15 s refresh interval of display is doubled to maximum 5 s
if measured values are stable. If measured values change, refresh interval
decreases to approximately 0.7 s. This dynamic mode prolongs battery life
significantly. Select the desired mode by ENTER key. Notice: if battery
voltage is low, the FAST mode is out of operation to reduce current
consumption independently on this selection.
Each pressing of ENTER key causes displaying of service information on
software version (upper LCD line) together with instrument configuration
on the LCD lower line.
Alarm indication and setting
