-12-
8-5. Data history readout
Android devices / iPhone
(1)Launch NFC Reader (or other NFC tag reading app).
(2)Position NFC on Android device or iPhone to the 'NFC' logo at the center portion of the this
instrument then bring in contact.
Laptop or PC + USB NFC Reader/Writer
(1)Launch ATAGO Logger.
(2)Bring the center part (where the 'NFC' logo is) of this instrument in contact with the NFC
mark on the IC card reader/writer.
* Do not move it.
(Hold for 1 second or more.)
* Do not move it.
(Hold for 1 second or more.)
*Bring this instrument and Android devices, this instrument and iPhone or this instrument and
USB NFC Reader/writer as close to each other as possible. (Position it so that the distance
between both devices are 5mm or less.)
*Data history can be read out while this instrument is powered off.
*Data history readout will not delete the stored data history.
* Be sure to establish the PC and IC card reader/writer connection in advance by setting up (and installing
the driver) IC card reader/writer.
* Data history can be read out by holding up the USB NFC Reader/writer to this instrument.
* If data history is not read out, bring both in contact and move the one that is over the other device in a
forward and back or left and right in a small motion.
* NFC position on Android device or iPhone differs to the model.
* If data history is not read out, bring both in contact and move the one that is over the other device
in a forward and back or left and right in a small motion.
All recorded data stored in
this instrument are read out.
All recorded data stored in
this instrument are read out.
SCALE
SCALE
