Atag WV6092 Series, Инструкция по эксплуатации

Страница: 36 / 44

EN 6
Cleaning
Attention! Before carrying out maintenance work, always disconnect
the cooker hood from the power supply by pulling the plug out of the
socket or by switching off the power at the fuse box. The hood must
be cleaned regularly, both inside as well as outside (with at least the
same regularity as used for cleaning the grease filters). Do not use any
products that contain abrasive materials.
Do not clean with alcohol!
Attention! If you do not follow these instructions with regards to the
cleaning of the appliance and the cleaning or replacement of the filters,
this can lead to fire. It is essential to follow these instructions!
The manufacturer is not liable for damage to the motor or damage as a
result of fire that is due to improper servicing or not following the above
safety requirements.
Cooker hood
Clean the cooker hood with a soft cloth with water and a little
detergent. Then wipe with clean water. Do not use aggressive cleaning
agents such as soda. The cooker hood's coating will remain in good
condition when you occasionally wax the coating.
Stainless steel hoods
Do not use scouring sponges or other abrasives on stainless steel
hoods. Give a finishing clean with a non-abrasive, non-polishing agent
and rub in the direction of the surface finish of the stainless steel.
Metal grease filters
Metal filters must be cleaned once a month (or when indicated by the
filter cleaning indicator, if fitted to the model) with neutral cleaning
agents, by hand or in the dishwasher at low temperatures using a short
programme. Put the grease filters in the dishwasher with the openings
facing down so that the water can drain. Aluminium grease filters will
become dull from the cleaning agents in the dishwasher. This is normal,
and does not affect the performance.
MAINTENANCE