Atag WS9111FM, Инструкция по эксплуатации

Страница: 48 / 71

EN 6
Operating instructions
Switching the fan on and off
• Use the On/Off button (A) to switch on the fan and select the
desired setting with button ‘B’.
If you press the button (B) once, when the hood is switched off,
the hood will be switched on at the lowest setting. By pressing the
button (B) again, you select a higher setting. You can select one of
three settings plus an intensive setting.
One LED will light up at setting 1; two will light up at setting 2 and
all three will light up at setting 3.
• Switch on the intensive setting by pressing ‘B’ and holding it for
min. 5 seconds until the third LED starts flashing.
You switch off the intensive setting early by pressing button ‘A’,
as a result of which the hood switches off, or by pressing button
‘B’, which will result in the hood switching back to the previously
selected setting.
The intensive setting automatically switches the speed back to the
previously selected setting after 10 minutes.
Switching the lighting on and off
• Use button ‘C’ to switch the lighting on and off and adjust the
intensity of the light.
Lighting indicator ‘E’ will light up as soon as the lighting has been
switched on. The lighting can be dimmed steplessly.
USE
G