Atag VA9611TT, Инструкция по использованию и уходу

Страница: 13 / 56

13
Press start
The dishwasher will now start. It manages
the entire wash automatically. Ensure that the
door is properly closed or the machine will not
start. The display shows ‘Program started’. If the
door is open or not properly closed, ‘Close door’
appears in the display.
Changing program
If you want to change program after having start-
ed the machine, press the Start/Stop button for
three seconds. Then select a new program and
press the Start/Stop button. Make sure there is
detergent in the dispenser.
Do you want to load more dishes?
Carefully open the door; the machine will stops
automatically, put in the dishes, close the door
and the dishwasher will continue from where it
left off.
If the machine is switched off at the
main switch
(or in the event of a power cut) before the wash-
ing program has been completed, the interrupt-
ed program will continue when the power comes
back on.
Note!
If the power is switched off, or if the door is open
during drying, the program is interrupted.
7
After dishwashing
Once the machine has finished, it only
draws standby current. Turn off the water faucet
if the machine is not to be used for an extended
period, such as during vacations, for example.
Basic Course