Atag VA63313LT, Руководство пользователя

Страница: 7 / 48

Consumption values
Programme
1)
Water
(l)
Energy
(kWh)
Duration
(min)
Eco 50° 10.5 0.932 232
Auto 45°-70° 7 - 15 0.6 - 1.7 40 - 170
Intensive 70° 12.5 - 14.5 1.4 - 1.7 170 - 190
Quick 60° 10 0.9 30
Rinse Hold 4 0.1 14
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity
of dishes can change the values.
Information for test institutes
For all the necessary information for test
performance, send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC)
that is on the rating plate.
SETTINGS
Programme selection mode and
user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
Settings available in the user mode:
• The level of water softener according to
the water hardness.
• Activation or deactivation of the
acoustic signal for the end of a
programme.
• Activation or deactivation of the rinse
aid empty notification.
• The level of rinse aid according to the
required dosage.
• Activation or deactivation of AirDry.
As the appliance stores the saved
settings, there is no need to configure
it before every cycle.
How to set the programme
selection mode
The appliance is in programme selection
mode when only the indicator of the
programme Eco 50° is on.
After activation, the appliance is in
programme selection mode by default. If
not, set the programme selection mode
the following way:
Press and hold simultaneously
and until the appliance is in programme
selection mode.
How to enter user mode
Make sure the appliance is in programme
selection mode.
To enter user mode, press and hold
simultaneously
and until the
indicators , , , and
start flashing.
7