contents
EN 19
INSTALLATION INSTRUCTIONS
Top-wood
Installation Instruction Top-wood
Attention:
the following instruction applies only to an
installation situation whereby the control knobs are in the
worktop, in combination with a "wooden" worktop. See the
"Installation situation table" on page 14.
Before you start
Choose the right position for the control knobs: in front, to
the left or to the right of the teppan yaki. You can position the
knobs in one of the following ways. This ensures that you can
read the temperature indication on the knob from the user's
position.
Built-in dimensions
1. The control box can be mounted on worktops with a
maximum thickness of 40 mm. If the worktop at the
position of the control knobs is thicker than 40 mm, refer to
the illustration opposite to create a cut-out in the bottom of
the worktop. Measure the thickness of the worktop and, if
necessary, create this cut-out in the worktop.
50
100
150
200
250
50
100
150
200
250
50
100
150
200
250
50
100
150
200
250
50
100
150
200
250
50
100
150
200
250
Rear zone
Front zone
R
F
F
R
R
F
Silicon sealing ring
Thickness worktop < 40 mm
in area P x Q
Ø30 mm
38 mm
135 mm
P = 270 mm
Q = 94 mm
47 mm
R2 mm
67.5 mm
Ø30 mm
Ø30 mm
Ø2 mm
Ø2 mm
Ø2 mm
