7
EN
Using This Manual
Thank you for purchasing an ATAG built-in oven.
Your User Manual contains important information on safety and instructions
intended to assist you in the operation and maintenance of your appliance.
Before using your oven, please read all the information in this manual and keep
it for future reference.
Safety Instructions
Installation of this oven must be performed only by a licensed electrician. The installer is
responsible for connecting the appliance to the mains power supply in observance of the relevant
safety recommendations.
Electrical safety
If the oven has been damaged in transport, do not connect it .
●
This appliance must be connected to the mains power supply only by a
specially licensed
electrician
.
●
In the event of a fault or damage to the appliance, do not attempt to operate it .
● Repairs
should be performed by a
licensed technician
only . Improper repair may result
in considerable danger to you and others . If your oven needs repair, contact the Atag
Customer Service or your dealer .
●
If the supply cord is defective, it must be replaced by a special cord or assembly available
from the manufacturer or an authorised service agent .
●
Electrical leads and cables should not be allowed to touch the oven .
●
The oven should be connected to the mains power supply by means of an approved circuit
breaker or fuse . Never use multiple plug adapters or extension leads .
●
The rating plate is located on the inside of the oven on the right side .
●
The power supply of the appliance should be turned off when it is being repaired or
cleaned .
●
Take care when connecting electrical appliances to sockets near the oven .
●
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety .
WARNING
Accessible parts may become hot during use . To avoid burns, young children should be kept
away .
WARNING
The appliance should be powered down before replacing the lamp to avoid the possibility of
electric shock . During oven operation, the interior surfaces become very hot .
95030_OX6211B_ATAG_EN.indd 7
2009-08-27 5:56:08
