Atag KU1190B, Инструкция по эксплуатации

Страница: 21 / 24

21
Problem: Cause or remedy:
Replacing the bulb:
1
STOP
2
0
6
7
• Before replacing the bulb, disconnect the appliance from
the power mains (unplug the power cord from the wall
outlet / socket). Insert a screwdriver into the slot in the
cover, lift it and remove it. Replace the bulb with a new
one (E14, same power rating as the one provided by the
manufacturer) and replace the cover.
• Do not dispose of the blown bulb with organic waste.
• The bulb is considered a consumable and is excluded
from any warranty!
• Bulb lamps used in this appliance are special purpose
lamps selected for household appliances use only. They
are not suitable for household room illumination.
Sound alarm: • Excessive dust on the condenser unit is signalled by a
sound alarm heard whenever appliance door is opened
until the default is removed.
• Check the air circulation through the bottom rail
openings and clean or vacuum the dust from the
condenser if necessary. See section CLEANING THE
APPLIANCE.
If none of the instructions above fixes your problem, call the nearest authorized service
center and state the type, model, and serial number found on the rating plate/label which is
located in the appliance interior.
541752