Atag KG6111P, Руководство пользователя

Страница: 34 / 40

GB 14
Faults table
FAULT CAUSE SOLUTION
The burner does not burn
evenly.
Burner parts incorrectly
installed.
Burner parts dirty or damp.
Wrong type of gas used
(where bottled gas is used).
Assemble the burner parts
using the centring ridges.
Clean and dry the burner
parts, making sure that the
outflow holes are open.
Check that the gas used is
suitable for the appliance.
The burner goes out after
igniting.
Control knob not kept
pressed in long enough
(appliances with
flame failure device).
Keep the control knob
pressed in for at least 5
seconds.
FAULTS