Atag HI06471D1, Инструкция по эксплуатации

Страница: 24 / 68

EN 8
Switching on and power setting
The power can be set to 10 different levels.
• Place the pan in the middle of a cooking zone.
• Press the On/Off button (A).
You will hear a single beep and a '0' will appear in the display (B)
next to each cooking zone. If you don't do anything else, the
cooking zone will switch off automatically after 10 seconds.
• Press the on/off button (C) for the cooking zone concerned.
The '0' next to the selected cooking zone will light up clearly.
• Using the – and + buttons (E) select the preferred power level.
When you select the – button directly, the cooking zone will be
switched on at power level 9.
• Set the power level to 9 and then touch the ‘+’ key to select the
Boost level.
The set power is visible in the display (B).
The appliance has been switched on with a 1 phase (3700 W)
power limitation. With this, it is possible to use 4 cooking zones
simultaneously at setting 7. If a higher setting is required for a cooking
zone, the power of another zone must first be reduced or the zone
must be switched off. If the power exceeds the permitted value, the
appliance will beep and the set power level in the display will start to
flash. In that case, set one zone to a lower setting.
Switching off
Switching off one cooking zone
One cooking zone is switched on. The display shows a power level
between 1 and 9 ot P.
• Press the button (C) for the cooking zone to be switched off. Set
the cooking zone to '0' with the – button (E).
The cooking zone switches off
The hob switches off after 20 seconds, if all cooking zones are set
to '0' and no other process is being used.
Switching off all cooking zones
Several cooking zones are active.
• Press the On/Off button (A) to switch off all cooking zones.
You will hear a beep. All displays are off. The hob is switched off.
OPERATION