Atag cafemax CM4411, Руководство пользователя, Страница: 138 / 326

EN 30
MESSAGES
MESSAGE MEANING WHAT TO DO
FILL TANK! The water tank is empty or not
properly in place.
The water tank is dirty or
limescale deposits have built up
inside it.
Fill the water tank and insert it
according to instructions, page
8 (fi g. 1).
Rinse out or descale the water
tank.
GROUND TOO FINE ADJUST
MILL + PRESS HOT WATER
KEY
Coffee comes out too slowly.
The coffee machine cannot
make any coffee.
Turn the knob for the grind
level setting clockwise by one
position (see “Setting the grind
level” on page 14).
Place a container underneath
the hot water nozzle and press
the “hot water” button .
EMPTY WASTE COFFEE
CONTAINER
The waste coffee container is
full.
Empty, clean and replace the
waste coffee container as
described on page 12.
INSERT WASTE COFFEE
CONTAINER
The waste coffee container was
not replaced after cleaning.
Open the service door and
insert the waste coffee
container.
ADD PRE-GROUND
COFFEE
No ground coffee was put into
the fi lling chute after selecting
the preground coffee function.
Add ground coffee as
described in (see “Preparing
espresso coffee using ground
coffee” on page 14 and 15).
FILL BEAN CONTAINER There are no more coffee beans
in the coffee bean container.
If the mill mechanism starts
sounding very loud, this can
mean that a small stone from
the coffee beans has blocked
the mill mechanism.
Fill the coffee bean container,.
Consult customer services.