13
330
Saphir
Instruction Manual
Metallography
4. Position ”1”
1. Main switch
If you operate emergency stop switch, the machine stops immediately.
2. Position “2”
In this position working wheels rotates with 300 rpm (Only with switch-over
for motor polarity).
3. Position “0”
In this position machine switched off complete.
4. Position “1”
In this position working wheels rotates with 150 rpm or 300 rpm
(according to equipment).
5. Controller for variable speed
During operation necessary speed could be adjusted from 50 - 600 rpm.
(optional)
3.2
Control display (Illustration Saphir 330E)
3. Position “0”
1. Main switch
5. Controller
for variable speed (optional)
2. Position “2”
