©A+T 2021 Issue 3020v1.1
3020 Display
PRODUCT USER GUIDE
The A+T 3020 is a high specification large format display. Very high contrast 62mm
high digits on toughened glass provide superb viewability under the harshest
conditions.
Supplied as either an Ethernet based unit for use with an A+T ATP processor or
Fastnet bus based for older systems. It is compatible, including remote button control,
with existing B&G H3000, H2000 and WTP2/3 systems using the Fastnet bus and will
fit the cut out and fastening holes of existing 20/20 displays.
Specifications:
Warranty:
The A+T 3020 is warranted against manufacturing defects for five years from date of shipping from factory on a
return to factory basis. Warranty is void if opened except by A+T. An integral tamper sensor is fitted.
The warranty specifically excludes physical damage, lightning strike to the vessel, overvoltage on supply or signal
lines and use outside the normal operating environment of a yacht.
Trademarks:
A+T is a registered trademark of A+T Instruments Ltd. B&G, H2000, H3000, WTP, WPT2 & WPT3 are product
names or trademarks of Navico UK Ltd whose use here is acknowledged.
Conformity.
This display complies with the CE EMC directive 2004/108/EC and Level 2 of the Radio
communications (Electromagnetic Compatibility) standard 2008
Input Voltage
10-40 Vdc, internal self resetting fuse
Consumption
0.9 to 1.4 W
Weight incl bezel and 5m cable
0.52 kg
Environmental
IP68, tested at 1m submersion for 24hr
Operating temperature
-10 to +70 deg C
Backlighting
Red or Green, tunable brightness
Compatibility
B&G Fastnet, A+T Ethernet