Asystems AV500HD Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 46

Asystems AV500HD Скачать руководство пользователя страница 19

17

AV500HD

English

Reverb & Mastering Options

Audio Follow

Stereo channels (5/6, 7/8, 9/10 and 11/12) include a

“Follow” button that activates the Audio Follow function

on the selected channel. This will, in essence, “link” the

channel’s audio to a video transition. An audio crossfader

will be applied to the audio signal consistent with the

length of the video transition.
When a channel’s Audio Follow feature is activated and

an audio signal is present, the “FOLLOW” LED on the

corresponding channel will illuminate.

Video/Audio Sync

Each and every channel features a delay function. If your

audio source and video source do not match up, select

the delay on screen and slowly increase the “SEL Knob”

until the audio and video are synced.

Adding Reverb
1.

Adjust the Reverb Send control on the required

channels (within Channel Setup menu).

2.

Go to the Reverb/Mastering menu and select your

effect type. Both “Room” and “Hall” reverb effects are
available.

3.

Select the on-screen “REVERB ON/OFF” button and

use the “ENTER” button to turn the effect on and off.

Mastering

The mastering features allows the user to adjust the
dynamic range and tone.

1.

Turn the Mastering feature on using the appropriate

button.

2.

Use the high, mid and low controls to adjust distortion

suppression in their respective frequency ranges.

3.

Adjust the degree of Noise Supression (“NS”).

4.

Enable and adjust the Enhancer.

1.

Monitor and adjust your levels on your Main, Aux,

Phones and USB Audio output mixes.

2.

Select your Main, Aux, Phones and Video output

sources from those available.

Reverb/Mastering

Main/Output

«
...
17
18
19
20
21
...
»

Содержание AV500HD















































Отзывы:

Нет отзывов