ASUSTOR NAS Quick Installation Guide
Page 7 of 16
o
2.5-inch hard disks and SSD hard disks:
Place the hard disk into the area of
the disk tray outlined in red (see picture below). Make sure that the mounting
holes on the bottom of the hard disk and disk tray are lined up. Secure the
drive with four screws.
Slide the disk tray onto the rails of the disk bay. Using the latch, gently push the
disk tray all the way into the disk bay. Secure the disk tray in place by pushing down
on the latch. The latch should close easily and snap in with an audible ‘click’. Please
make sure that the disk tray is pushed all the way into the disk bay before
attempting to secure the latch.
