ASUSTeK COMPUTER W480EI-IM-A, Руководство пользователя

Страница: 20 / 59

W480EI-IM-A
2-12
6. Chassis intrusion jumper (4-1 pin CHASSIS)
This header is for a chassis-mounted intrusion detection sensor or switch. Connect
one end of the chassis intrusion sensor or switch cable to this connector. The
chassis intrusion sensor or switch sends a high-level signal to this connector when
a chassis component is removed or replaced. The signal is then generated as a
chassis intrusion event.
By default, the pin labeled “Chassis Signal” and “Ground” are shorted with jumper
caps. Remove the jumper caps only when you intend to use the chassis intrusion
detection feature.
PIN 1
+5VSB_MB Chassis Signal GND
CHASSIS
Connector type
HEADER 4p, K2, 2.54mm pitch
5. Disable ME jumper (3-pin DIS_ME)
This jumper allows you to enable or disable the Intel
®
ME function. Set this
jumper to pins 1-2 to enable (default) the Intel
®
ME function and to pins 2-3 to
disable it.
2 1
2 3
DIS_ME
Disable intel
ME function
Normal
(Default)
Connector type
HEADER 1x3p, 2.54mm pitch, S/T