52
20MHz (default):
Select this bandwidth if you encounter some
issues with your wireless connection.
7. Select the operating channel for your wireless router. Select
Auto
to allow the wireless router to automatically select the
channel that has the least amount of interference.
8. Select any of these authentication methods:
•
Open System
: This option provides no security.
•
Shared Key
: You must use WEP encryption and enter at least
one shared key.
•
WPA/WPA2 Personal/WPA Auto-Personal
: This option
provides strong security. You can use either WPA (with
TKIP) or WPA2 (with AES). If you select this option, you must
use TKIP + AES encryption and enter the WPA passphrase
(network key).
•
WPA/WPA2 Enterprise/WPA Auto-Enterprise
: This option
provides very strong security. It is with integrated EAP server
or an external RADIUS back-end authentication server.
•
Radius with 802.1x
NOTE:
Your wireless router supports the maximum transmission rate
of 54Mbps when the
Wireless Mode
is set to
Auto
and
encryption
method
is
WEP
or
TKIP
.
9. Select any of these WEP (Wired Equivalent Privacy) Encryption
options for the data transmitted over your wireless network:
•
Off
: Disables WEP encryption
•
64-bit
: Enables weak WEP encryption
•
128-bit
: Enables improved WEP encryption
10.When done, click
Apply
.
Содержание XT8
Страница 93: ...93 8 After the printer s driver installation is complete network clients can now use the printer ...
Страница 98: ...98 9 Click Next to accept the default name for the printer 10 Click Finish to complete the installation ...
Страница 101: ...101 5 4 2 NZB settings You can set up a USENET server to download NZB files After entering USENET settings Apply ...