Asus XG-DLS Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 58

background image

ASUS XG-DLS User’s Manual

41

IV. BIOS SOFTWARE

IV

. BIOS

Standard CMOS

Time
To set the time, highlight the “Time” field and then press either <Page Up>/<Page Down>
or <+>/<–> to set the current time. Follow the hour, minute and second format. Valid
values for hour, minute and second are: (Hour: (00 to 23), Minute: (00 to 59), Second:
(00 to 59).

NOTE: You can bypass the date and time prompts by creating an AUTOEXEC.BAT
file. For information on how to create this file, please refer to the MS-DOS manual.

Hard Disks
This field records the specifications for all non-SCSI hard disk drives installed in
your system. The onboard PCI IDE connectors provide Primary and Secondary
channels for connecting up to four IDE hard disks or other IDE devices. Each chan-
nel can support up to two hard disks; the first of which is the “master” and the
second is the “slave”.

Specifications for SCSI hard disks need not to be entered here since they operate
using device drivers and are not supported bythe BIOS. If you install other SCSI
controller cards, refer to their respective documentations on how to install the re-
quired SCSI drivers.

For IDE hard disk drive setup, you can:

•

Use the Auto setting for detection during bootup.

•

Use the IDE HDD AUTO DETECTION in the main menu to automatically
enter the drive specifications.

•

Enter the specifications yourself manually by using the “User” option.

The entries for specifying the hard disk type include CYLS (number of cylinders),
HEAD (number of read/write heads), PRECOMP (write precompensation), LANDZ
(landing zone), SECTOR (number of sectors) and MODE. The SIZE field auto-
matically adjusts according to the configuration you specify. The documentation
that comes with your hard disk should provide you with the information regarding
the drive specifications.

The MODE entry is for IDE hard disks only, and can be ignored for MFM and ESDI
drives. This entry provides three options: Normal, Large, LBA, or Auto (see below).
Set MODE to the Normal for IDE hard disk drives smaller than 528MB; set it to
LBA for drives over 528MB that support Logical Block Addressing (LBA) to allow
larger IDE hard disks; set it to Large for drives over 528MB that do not support
LBA. Large type of drive can only be used with MS-DOS and is very uncommon.
Most IDE drives over 528MB support the LBA mode.

«
...
39
40
41
42
43
...
»

Содержание XG-DLS



























































Отзывы:

Нет отзывов

Похожие инструкции для XG-DLS

Бренд: JETWAY Страницы: 44

Бренд: Zotac Страницы: 54

Бренд: Quick Страницы: 32

Бренд: JETWAY Страницы: 38

Бренд: IBASE Technology Страницы: 60

Бренд: AMD Geode Страницы: 51

Бренд: Silicon Laboratories Страницы: 16

Бренд: NXP Semiconductors Страницы: 32

Бренд: austriamicrosystems Страницы: 19

X58 PLATINUM SLI - Motherboard - ATX

Бренд: MSI Страницы: 74

Бренд: ASROCK Страницы: 56

Бренд: Epcom Страницы: 8

Бренд: Linear Страницы: 16

COMe Ref.Carrier T6

Бренд: Kontron Страницы: 41

NB-IoT Module Series

Бренд: Quectel Страницы: 31

Бренд: HONDA marine Страницы: 2

Бренд: Analog Devices Страницы: 13

Бренд: Micronics Страницы: 63

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды