manualshive.com logo in svg

Asus XC Cube box, Руководство пользователя

Поделиться
Скачать
Asus XC Cube box Скачать руководство пользователя страница 35

ASUS Z9PE-D8 WS

2-13

2.4 

System memory

2.4.1 

Overview

The motherboard comes with eight (four DIMM per CPU) Double Data Rate 3 

(DDR3) Dual Inline Memory Modules (DIMM) sockets.
A DDR3 module has the same physical dimensions as a DDR2 DIMM but is 

notched differently to prevent installation on a DDR2 DIMM socket. DDR3 modules 

are developed for better performance with less power consumption.

The figure illustrates the location of the DDR3 DIMM sockets:

2.4.2 

Memory Configurations

You may install 1GB, 2GB, 4GB, 8GB, 16GB and 32GB* RDIMMs or 

1GB, 2GB, 

4GB and 8GB* with ECC/Non-ECC UDIMMs or 

8GB, 16GB and 32GB* LR-DIMMs into 

the DIMM sockets using the memory configurations in this section.

1 CPU Configuration (must on CPU1)

DIMM_A1 DIMM_B1 DIMM_C1 DIMM_D1

1 DIMMs

X

2 DIMMs

X

X

4 DIMMs

X

X

X

X

•  *Refer to ASUS Server AVL for latest update.
•  Install the DIMMs starting from slot A1 (CPU1) and E1 (CPU2).
•  Always install DIMMs with the same CAS latency. For optimum 

compatibility, it is recommended that you obtain memory modules from the 

same vendor.

Содержание XC Cube box



































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды