ASUS WL-127 Card
7
4.2 Hardware installation
Follow these steps to install the WL-127 card in your system.
CAUTION! Before handling the card, touch a bare metal portion of your PC to
discharge static electricity from your body. Wear a wrist strap grounded to the PC
chassis when handling the card.
IMPORTANT! The PCI5 and the Wi-Fi slot may not be used simultaneously on
certain motherboards. Check your motherboard documentation for this limitation.
1.
Make sure that the PC is turned off. Unplug the power cord from the electrical socket.
2.
Remove the PC cover.
3.
Locate the Wi-Fi slot. Refer to your motherboard documentation for the Wi-Fi slot
location.
4.
Remove the rear panel bracket opposite the Wi-Fi slot. Keep the screw for later use.
5.
Carefully insert the card into the Wi-Fi slot. To prevent incorrect orientation, one pin of
the WL-127 connector is removed to match the covered hole on the Wi-Fi slot.
6.
Secure the card with the screw that you removed earlier.
7.
Replace the PC cover and plug in the power cord.
