ASUS V8460/V8440/V8420 Series User’s Manual
18
3. Software Setup
3. S
/W
Setup
Windows NT 4.0
Method 1: Display Property Page
WARNING!
Before installing the display driver in Windows NT 4.0, make
sure that you have installed Windows NT 4.0 Service Pack 3 or later, to take
full advantage of the AGP features of your card. (You may download service
packs at http://www.microsoft.com/ntworkstation/downloads.)
NOTE: The following steps assume your CD-ROM drive letter is D.
1. Start Windows NT, switch display properties to VGA mode (16 colors, 640 x 480
pixels), then restart your computer to make the change.
2. After your computer restarts, right-click the desktop and click Properties.
3. Click the Settings tab.
4. Select Change Display Type.
5. Select Adapter Type and click Change.
6. Click Have Disk.
7. Insert the CD installation disc.
8. Type D:\NT40 or click Browse to select the path of the display driver for
Windows NT. Click OK.
9. Select ASUS V8460/V8440/V8420 and then click OK.
10. Windows NT will once again prompt for confirmation. All appropriate files are
then copied to the hard disk. When all files are copied, go back to the Display
Properties box by clicking Close. Click Apply.
11. The System Settings Change dialog box is displayed. Click Yes to restart Windows.
12. Windows NT will restart with the default settings. The Display applet will
appear to allow for mode selection.
Display Drivers
Display Drivers