Asus V Series Скачать руководство пользователя

Страница: 72 / 100

5-8

Chapter 5: BIOS setup

5.1.5 ASUS Update utility

The ASUS Update is a utility that allows you to manage, save, and update

the motherboard BIOS in Windows

environment. The ASUS Update utility

allows you to:

•

Save the current BIOS file

•

Download the latest BIOS file from the Internet

•

Update the BIOS from an updated BIOS file

•

Update the BIOS directly from the Internet, and

•

View the BIOS version information.

This utility is available in the support CD that comes with the motherboard

package.

ASUS Update requires an Internet connection either through a network

or an Internet Service Provider (ISP).

• Only the USB flash disk with FAT 32/16 format and single partition

can support ASUS CrashFree BIOS 3. The device size should be

smaller than 8GB.

• DO NOT shut down or reset the system while updating the BIOS!

Doing so can cause system boot failure!

Installing ASUS Update

To install ASUS Update:

1. Place the support CD in the optical drive. The Drivers menu appears.
2. Click the Utilities tab, then click Install ASUS Update. See page 3-5 for

the Utilities screen menu.

3. The ASUS Update utility is copied to your system.

Quit all Windows

applications before you update the BIOS using this

utility.

Содержание V Series





































































































Результаты поиска

Содержание V Series

Отзывы:

Похожие инструкции для V Series

Бренды по названию

Популярные бренды

Asus V Series, Руководство пользователя

Результаты поиска

Содержание V Series

Отзывы:

Похожие инструкции для V Series

Бренды по названию

Популярные бренды