6 - 5
6 - 5
6 - 5
6 - 5
6 - 5
A S U S T S 1 5 0 - E 2
A S U S T S 1 5 0 - E 2
A S U S T S 1 5 0 - E 2
A S U S T S 1 5 0 - E 2
A S U S T S 1 5 0 - E 2
Creating a RAID 0 set (striped)
Creating a RAID 0 set (striped)
Creating a RAID 0 set (striped)
Creating a RAID 0 set (striped)
Creating a RAID 0 set (striped)
To create a RAID 0 set:
1.
From the utility main menu, select [ 1 . C r e a t e R A I D V o l u m e ]
[ 1 . C r e a t e R A I D V o l u m e ]
[ 1 . C r e a t e R A I D V o l u m e ]
[ 1 . C r e a t e R A I D V o l u m e ]
[ 1 . C r e a t e R A I D V o l u m e ],
then press <Enter>. The following screen appears.
[
HELP
]
Enter a string between 1 and 16 characters in length taht can be used
to uniquely identify the RAID volume. This name is case sensitive and
can not contain special characters.
Intel(R) Application Accelerator RAID Option ROM v4.0.0.6211
Copyright(C) 2003-04 Intel Corporation. All Rights Reserved.
[
CREATE ARRAY MENU
]
Name:
RAID_Volume1
RAID Level: RAID0(Stripe)
Disks:
Select Disk
Strip Size:
128KB
Capacity:
149.0GB
[ ]-Change
[ ]-Change
[TAB]-Next
[TAB]-Next
[ESC] Previous Menu
[ESC] Previous Menu
[Enter]-Select
[Enter]-Select
2.
Enter a name for the RAID 0 set, then press <Enter>.
3.
Use the up or down arrow keys to move to the R A I D L e v e l
R A I D L e v e l
R A I D L e v e l
R A I D L e v e l
R A I D L e v e l item.
4.
When the R A I D L e v e l
R A I D L e v e l
R A I D L e v e l
R A I D L e v e l
R A I D L e v e l item is highlighted, press the up or down
arrow key to select R A I D 0
R A I D 0
R A I D 0
R A I D 0
R A I D 0, then press <Enter>.
5.
Use the up or down arrow keys to move to the S t r i p e S i z e
S t r i p e S i z e
S t r i p e S i z e
S t r i p e S i z e
S t r i p e S i z e option.
6.
When the S t r i p e S i z e
S t r i p e S i z e
S t r i p e S i z e
S t r i p e S i z e
S t r i p e S i z e item is highlighted, press the up or down
arrow keys to select the stripe size for the RAID 0 array, then press
<Enter>.
The available stripe size values range from 8KB to 128KB. The default
stripe size is 128 KB. You must choose the stripe size value based on
the projected drive usage. For low disk usage, select 8 KB/16 KB. For
typical disk usage, select 64 KB. select 128KB for performance disk
usage.
T I P :
T I P :
T I P :
T I P :
T I P : For server systems, use of a lower array block size is
recommended. For multimedia computer systems used mainly for audio
and video editing, a higher array block size is recommended for optimum
performance.
Содержание TS150-E2
Страница 1: ...TS150 E2 Pedestal Server ...
