Asus TS150-E2, Руководство пользователя

Страница: 105 / 134

5 - 3 5 5 - 3 5 5 - 3 5 5 - 3 5 5 - 3 5 A S U S T S 1 5 0 - E 2 A S U S T S 1 5 0 - E 2 A S U S T S 1 5 0 - E 2 A S U S T S 1 5 0 - E 2 A S U S T S 1 5 0 - E 2
Hit ‘DEL’ Message Display [Enabled] Hit ‘DEL’ Message Display [Enabled]
Hit ‘DEL’ Message Display [Enabled] Hit ‘DEL’ Message Display [Enabled]
Hit ‘DEL’ Message Display [Enabled]
When set to Enabled, the system displays the message “Press DEL to run
Setup” during POST. Configuration options: [Disabled] [Enabled]
Interrupt 19 Capture [Disabled] Interrupt 19 Capture [Disabled]
Interrupt 19 Capture [Disabled] Interrupt 19 Capture [Disabled] Interrupt 19 Capture [Disabled]
When set to [Enabled], this function allows the option ROMs to trap
Interrupt 19. Configuration options: [Disabled] [Enabled]
5.6.4 5.6.4 5.6.4 5.6.4 5.6.4 Security Security Security Security Security
The Security menu items allow you to change the system security settings.
Select an item then press <Enter> to display the configuration options.
Security Settings
Supervisor Password : Not Installed
User Password : Not Installed
Change Supervisor Pas
sword
Boot Sector Virus Protection [Disabled]
<Enter> to change
password.
<Enter> again to
disabled password.
Change Supervisor Password Change Supervisor Password
Change Supervisor Password Change Supervisor Password
Change Supervisor Password
Select this item to set or change the supervisor password. The Supervisor
Password item on top of the screen shows the default N o t I n s t a l l e d
N o t I n s t a l l e d
N o t I n s t a l l e d N o t I n s t a l l e d N o t I n s t a l l e d.
After you set a password, this item shows I n s t a l l e d I n s t a l l e d
I n s t a l l e d I n s t a l l e d
I n s t a l l e d.
To set a Supervisor Password:
1. Select the Change Supervisor Password item and press <Enter>.
2. From the password box, type a password composed of at least six
letters and/or numbers, then press <Enter>.
3. Confirm the password when prompted.
The message “Password Installed” appears after you successfully set your
password.
To change the supervisor password, follow the same steps as in setting a
user password.
To clear the supervisor password, select the Change Supervisor Password
then press <Enter>. The message “Password Uninstalled” appears.