Asus Terminator 1 A7VT, Руководство пользователя, Страница: 31 / 98

ASUS Terminator 1 A7VT barebone system 31
2.9 Installing a CD-ROM drive
A CD-ROM drive is an optional item in this barebone system. Refer to the
instructions in this section if you acquired a model without a CD-ROM.
Follow these steps to install a
CD-ROM drive.
1. Place the chassis upright.
2. Insert the CD-ROM drive into
the upper 5.25-inch drive bay.
CD-ROM screws
5.25-inch drive bay
3. Carefully push the CD-ROM
drive into the bay until its
screw holes align with the
holes on the bay as shown.
4. Secure the CD-ROM with two
screws on each side of the
bay.