Asus T2-PE1, Руководство по эксплуатации продукта

Страница: 33 / 110

2 - 1 5 2 - 1 5
2 - 1 5 2 - 1 5
2 - 1 5 A S U S T 2 - P E 1 A S U S T 2 - P E 1
A S U S T 2 - P E 1 A S U S T 2 - P E 1
A S U S T 2 - P E 1
When using a PCI card on shared slots, ensure that the drivers support
“Share IRQ” or that the cards do not need IRQ assignments; otherwise,
conflicts will arise between the two PCI groups, making the system
unstable and the card inoperable.
Standard interrupt assignments Standard interrupt assignments Standard interrupt assignments Standard interrupt assignments Standard interrupt assignments
I R Q I R Q
I R Q I R Q
I R Q S t a n d a r d F u n c t i o n S t a n d a r d F u n c t i o n
S t a n d a r d F u n c t i o n S t a n d a r d F u n c t i o n
S t a n d a r d F u n c t i o n
1 Keyboard Controller
2 Programmable Interrupt
4 Communications Port (COM1)
6 Floppy Disk Controller
7* Printer Port (LPT1)
8 System CMOS/Real Time Clock
9* ACPI Mode when used
10* IRQ Holder for PCI Steering
11* IRQ Holder for PCI Steering
12* PS/2 Compatible Mouse Port
13 Numeric Data Processor
14* Primary IDE Channel
* These IRQs are usually available for ISA or PCI devices.
IRQ assignments for this motherboard IRQ assignments for this motherboard IRQ assignments for this motherboard IRQ assignments for this motherboard IRQ assignments for this motherboard
A A A A A B B B B B C C C C C D D D D D E EE EE F FF FF G G G G G H H H H H
PCI slot 1 –– shared –– –– –– –– –– ––
PCIEX16 shared –– –– –– –– –– –– ––
Onboard EHCI USB controller –– –– –– shared –– –– –– ––
Onboard OHCI USB controller 1 –– –– –– shared –– –– –– ––
Onboard OHCI USB controller 2 –– –– –– shared –– –– –– ––
Onboard LAN –– shared –– –– –– –– –– ––
Onboard Audio –– shared –– –– –– –– –– ––
Onboard 1394 –– –– –– –– shared –– –– ––
2.7.3 2.7.3
2.7.3 2.7.3 2.7.3
Configuring an expansion card Configuring an expansion card
Configuring an expansion card Configuring an expansion card Configuring an expansion card
After installing the expansion card, configure it by adjusting the software
settings.
1. Turn on the system and change the necessary BIOS settings, if any.
See Chapter 5 for information on BIOS setup.
2. Assign an IRQ to the card. Refer to the tables on the next page.
3. Install the software drivers for the expansion card.