background image

5-25

ASUS T-P5G43

5.5.5 

APM Configuration

APM Configuration

Restore on AC Power Loss 

[Power Off]

Power On By RTC Alarm 

[Disabled]

Power On By PCI Devices 

[Disabled]

Power On By PCIE Devices 

[Disabled]

Power On By PS/2 Keyboard 

[Disabled]

Power On By PS/2 Mouse 

[Disabled]

Restore on AC Power Loss [Power Off]

When set to Power Off, the system goes into off state after an AC power loss. 

When set to Power On, the system goes on after an AC power loss. When set to 

Last State, the system goes into either off or on state, whatever the system state 

was before the AC power loss. Configuration options: [Power Off] [Power On] 

 

[Last State] 

Power On By RTC Alarm [Disabled]

Allows you to enable or disable RTC to generate a wake event. When this item is 

set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute, 

and RTC Alarm Second appear with set values. Configuration options: [Disabled] 

[Enabled]

Power On By PCI Devices [Disabled]

When set to [Enabled], this parameter allows you to turn on the system through a 

PCI LAN or modem card. This feature requires an ATX power supply that provides 

at least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]

<Enter> to select 

whether or not to 

restart the system 

after AC power loss.

5.5.4 

ACPI APIC Support [Enabled]

Allows you to enable or disable the Advanced Configuration and Power Interface 

(ACPI) support in the Application-Specific Integrated Circuit (ASIC). When set 

to Enabled, the ACPI APIC table pointer is included in the RSDT pointer list. 

Configuration options: [Disabled] [Enabled]

Содержание T-P5G43









































































































Отзывы: