Asus STRIX X99 Скачать руководство пользователя страница 120

Страница: 120 / 130

4-8

Chapter 4:RAID Support

Chapter 4

Use the up/down arrow key to select a drive, and then press <Space> to select. A

small triangle marks the selected drive. Press <Enter> after completing your selection.

Use the up/down arrow key to select the strip size for the RAID array (for RAID 0, 10

and 5 only), and then press <Enter>. The available strip size values range from 4 KB to

128 KB. The following are typical values:

RAID 0: 128 KB

RAID 10: 64 KB

RAID 5: 64 KB

We recommend a lower strip size for server systems, and a higher strip size for multimedia

computer systems used mainly for audio and video editing.

When the

Capacity

item is selected, enter the RAID volume capacity that you want

and press <Enter>. The default value indicates the maximum allowed capacity.

When the

Create Volume

item is selected, press <Enter>. The following warning

message appears:

Press <Y> to create the RAID volume and return to the main menu, or <N> to go back

to the CREATE VOLUME menu.

WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.

Are you sure you want to create this volume? (Y/N)

Содержание STRIX X99



































































































































Результаты поиска

Содержание STRIX X99

Отзывы:

Asus STRIX X99, Руководство пользователя, Страница: 120 / 130

Результаты поиска

Содержание STRIX X99

Отзывы: