Asus RS720A-E9-RS24-E Скачать руководство пользователя страница 101

Страница: 101 / 162

System fan connectors (4-pin FRNT_FAN1-8)

The fan connectors support cooling fans of 0.8A–1.0A (12 W max.) or a total of 6.4

A–8.0 A (96 W max.) at +12V. Connect the fan cables to the fan connectors on the

motherboard, making sure that the black wire of each cable matches the ground pin of

the connector.

DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside

the system may damage the motherboard components. These are not jumpers! DO NOT

place jumper caps on the fan connectors!

TPM connector (14-1 pin TPM1)

This connector supports a Trusted Platform Module (TPM) system, which can securely

store keys, digital certificates, passwords, and data. A TPM system also helps enhance

network security, protects digital identities, and ensures platform integrity.

Содержание RS720A-E9-RS24-E



































































































































































Результаты поиска

Содержание RS720A-E9-RS24-E

Отзывы:

Asus RS720A-E9-RS24-E, Руководство пользователя, Страница: 101 / 162

Результаты поиска

Содержание RS720A-E9-RS24-E

Отзывы: