Asus RS720-E9 Series Скачать руководство пользователя страница 29

Страница: 29 / 194

2-3

ASUS RS720-E9 Series

2.2.1

Installing the CPU and heatsink

To install a CPU:

Remove the rear cover. For more information, see the section

Chassis cover

Remove the air duct screw (A), remove the air ducts (B), and then remove the PnP

caps (C) from the CPU sockets.

Keep the PnP cap. ASUS will process Return Merchandise Authorization (RMA) requests

only if the motherboard comes with the PnP cap on the LGA 3647 socket.

2.2

Central Processing Unit (CPU)

The motherboard comes with a surface mount LGA 3647 socket designed for the Intel

Xeon

Processor Scalable Family Series (supported on CPU1 and CPU2) and Intel

Xeon

Processor Scalable Family Series with OMNI-PATH FABRIC (supported on CPU2).

•

Upon purchase of the motherboard, ensure that the PnP cap is on the socket and

the socket contacts are not bent. Contact your retailer immediately if the PnP cap

is missing, or if you see any damage to the PnP cap/socket contacts/motherboard

components. ASUS will shoulder the cost of repair only if the damage is shipment/

transit-related.

•

Keep the cap after installing the motherboard. ASUS will process Return Merchandise

Authorization (RMA) requests only if the motherboard comes with the cap on the LGA

3647 socket.

•

The product warranty does not cover damage to the socket contacts resulting from

incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP

cap.

Содержание RS720-E9 Series



































































































































































































Результаты поиска

Содержание RS720-E9 Series

Отзывы:

Похожие инструкции для RS720-E9 Series

Бренды по названию

Популярные бренды

Asus RS720-E9 Series, Руководство пользователя

Результаты поиска

Содержание RS720-E9 Series

Отзывы:

Похожие инструкции для RS720-E9 Series

Бренды по названию

Популярные бренды