Asus RS720-E9 Series Скачать руководство пользователя страница 101

Страница: 101 / 194

ASUS RS720-E9 Series

4-19

11. Back panel power connectors (8-pin BPPWR1-2)

These connectors are for the power supply plugs that connects to the back panel. The

power supply plugs are designed to fit these connectors in only one orientation. Find

the proper orientation and push down firmly until the connectors completely fit.

12. VGA power connectors (8-pin VGAPWR1-3)

These connectors are for the power supply plugs that connects to the VGA card. The

power supply plugs are designed to fit these connectors in only one orientation. Find

the proper orientation and push down firmly until the connectors completely fit.

DO NOT connect the back panel to these connectors. Doing so may cause system boot

errors and permanent damage to your motherboard or device.

DO NOT connect VGA cards to these connectors. Doing so may cause system boot errors

and permanent damage to your motherboard or device.

Содержание RS720-E9 Series



































































































































































































Результаты поиска

Содержание RS720-E9 Series

Отзывы:

Asus RS720-E9 Series, Руководство пользователя, Страница: 101 / 194

Результаты поиска

Содержание RS720-E9 Series

Отзывы: