Asus RS720-E9-RS24-E Скачать руководство пользователя страница 147

Страница: 147 / 180

6-7

ASUS RS720-E9-RS24-E

6.2.2

Deleting a RAID set

Take caution when deleting a RAID set. You will lose all data on the hard disk drives when

you delete a RAID set.

To delete a RAID set:

From the utility main menu, select

2. Delete RAID Volume

and press <Enter>.

From the Delete Volume Menu, press the up/down arrow keys to select the RAID set

you want to delete then press <Del>.

Press <Y> to confirm deletion of the selected RAID set and return to the utility main

menu, or press <N> to return to the

DELETE VOLUME

menu.

[ESC]-Previous Menu

[ ]-Select

Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.6.0.1023

[

DELETE VOLUME MENU

]

[

HELP

]

Deleting a volume will reset the disks to non-RAID

WARNING:

ALL DISK DATA WILL BE DELETED.

(This does not apply to Recovery volumes)

[DEL]-Delete Volume

Name Level Drives Capacity Status Bootable

Volume0 RAID0(Stripe) 2 298.0GB Normal Yes

ALL DATA IN THE VOLUME WILL BE LOST!

(This does not apply to Recovery volumes)

Are you sure you want to delete volume “Volume0”? (Y/N):

[

DELETE VOLUME VERIFICATION

]

Содержание RS720-E9-RS24-E





















































































































































































Результаты поиска

Содержание RS720-E9-RS24-E

Отзывы:

Asus RS720-E9-RS24-E, Руководство пользователя, Страница: 147 / 180

Результаты поиска

Содержание RS720-E9-RS24-E

Отзывы: