manualshive.com logo in svg

Asus RS520-E9-RS12-E, Руководство пользователя

Поделиться
Скачать
Asus RS520-E9-RS12-E Скачать руководство пользователя страница 36

Chapter 2: Hardware Information

2-8

2.4 

Storage devices

The RS520-E9-RS8 Series system supports eight (8) 

2.5” or 3.5” hot-swap storage devices, 

the RS520-E9-RS12 Series system supports twelve (12) storage devices, and both support 

two (2) additional hot-swap 2.5” storage devices on the rear panel. The storage device 

installed on the tray connects to the motherboard 

SATA/SAS/NVMe 

ports via the SATA/SAS/

NVMe 

backplane 

(SAS drives require an optional ASUS PIKE II card).

To install a 3.5” storage device to the front panel:

1. 

Push the spring lock to the right (A) 

then pull the tray lever outward (B) 

to release the tray. The tray ejects 

slightly after you pull out the lever.

Spring lock

Tray lever

2. 

Firmly hold the tray lever and pull the 

tray out of the bay.

3. 

Place the tray on a flat and stable surface.

4. 

Prepare the 3.5” storage device and the bundled set of screws.

Содержание RS520-E9-RS12-E



















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды