Asus RS320Q-E7 RS12 Скачать руководство пользователя страница 56

Страница: 56 / 158

4-8

Chapter 4: Motherboard information

Thermal sensor cable connectors (3-pin TR1/TR2)

This connector is for temperature monitoring. Connect the thermal sensor cable

to this connector and place the other end to the device, which you want to monitor

temperature.

Front fan connectors (FRNT_FAN1, FRNT_FAN2, FRNT_FAN3, FRNT_FAN4)

The fan connectors support cooling fans of 350 mA–740 mA (8.88 W max.) or a total of

3.15 A–6.66 A (53.28 W max.) at +12V. Connect the fan cables to the fan connectors

on the motherboard, ensuring that the black wire of each cable matches the ground pin

of the connector.

•

DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow

inside the system may damage the motherboard components.

•

These are not jumpers! DO NOT place jumper caps on the fan connectors!

•

All fans feature the ASUS Smart Fan technology.

Содержание RS320Q-E7 RS12































































































































































Результаты поиска

Содержание RS320Q-E7 RS12

Отзывы:

Asus RS320Q-E7 RS12, Руководство пользователя, Страница: 56 / 158

Результаты поиска

Содержание RS320Q-E7 RS12

Отзывы: