Asus RS320Q-E7 RS12, Руководство пользователя, Страница: 126 / 158

6-32 Chapter 6: RAID configuration
Select a destination disk with the same size as the original hard disk.
6.3.7 Rebuilding the RAID
This option is only for the RAID 1 set.
Rebuilding the RAID with other non-RAID disk
If any of the SATA hard disk drives included in the RAID 1 array failed, the system displays
the status of the RAID volume as “ Degraded ” during POST. You can rebuild the RAID array
with other installed non-RAID disks.
To rebuild the RAID with other non-RAID disk:
1. At the prompt, press <Ctrl> + <I> to enter the Intel Rapid Storage Technology option
ROM utility.
2. If there is a non-RAID SATA Hard Disk available, the utility will prompt to rebuild the
RAID. Press <Enter>, and then use up/down arrow keys to select the destination disk
or press <ESC> to exit.
6.3.6 Exiting the Intel
®
Rapid Storage Technology utility
To exit the utility:
1.
From the utility main menu, select 4. Exit , and then press <Enter>. The following
warning message appears.
2. Press <Y> to exit or press <N> to return to the utility main menu.
Are you sure you want to exit? (Y/N):
[ CONFIRM EXIT ]
[ DEGRADED VOLUME DETECTED ]
[
↑↓
]-Previous/Next [ENTER]-Select [ESC]-Exit
"Degraded" volume and disk available for rebuilding detected. Selecting
a disk initiates a rebuild. Rebuild completes in the operating system.
Select the port of destination disk for rebuilding (ESC to exit):
Port Drive Model Serial # Size
X XXXXXXXXXXX XXXXXXXX XX.XGB