Asus RS300-E8-PS4 Скачать руководство пользователя страница 128

Страница: 128 / 158

7-2

Chapter 7: Driver installation

7.1

RAID driver installation

After creating the RAID sets for your server system, you are now ready to install

an operating system to the independent hard disk drive or bootable array. This part

provides the instructions on how to install the RAID controller drivers during OS

installation.

7.1.1

Creating a RAID driver disk

The system does not include a floppy drive. You have to use a USB floppy drive

when creating a SATA RAID driver disk.

If you have created RAID sets with the LSI Software RAID configuration utility,

the boot priority of the SATA optical disk drive has to be manually adjusted.

Otherwise, the system will not boot from the connected SATA ODD.

A floppy disk with the RAID driver is required when installing Windows

or Red Hat

Enterprise operating system on a hard disk drive that is included in a RAID set.

You can create a RAID driver disk in DOS (using the Makedisk application in the

support DVD).

To create a RAID driver disk in DOS environment:

1.  Place the motherboard support DVD in the optical drive.
2.  Restart the computer.
3.   Enter the BIOS Setup.
4.  Select the optical drive as the first boot priority to boot from the support DVD.

Save your changes.

5. Exit the BIOS Setup and restart the computer.

The following Makedisk menu appears.

6. Select the

C22x INTEL RAID Driver

and press <Enter> to go to the sub-

menu.

7. From the Makedisk sub-menu, use the Up or Down arrow keys to select the

driver and press <Enter> to create the RAID driver disk.

Create Driver Diskette Menu

C22x INTEL RAID Driver

Write DMI

FreeDOS command prompt

C22x INTEL RAID Driver

Windows 32 bit(AHCI / AHCI RAID)

Windows Server 2012 64 bit (AHCI / AHCI RAID)

Back

Exit

Содержание RS300-E8-PS4































































































































































Результаты поиска

Содержание RS300-E8-PS4

Отзывы:

Похожие инструкции для RS300-E8-PS4

Бренды по названию

Популярные бренды

Asus RS300-E8-PS4, Руководство пользователя

Результаты поиска

Содержание RS300-E8-PS4

Отзывы:

Похожие инструкции для RS300-E8-PS4

Бренды по названию

Популярные бренды