Asus RS120-E4 - 0 MB RAM Скачать руководство пользователя страница 72

Страница: 72 / 174

5-6

Chapter 5: BIOS setup

5.1.3.

ASUS.CrashFree.BIOS.2.utility

The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to restore

the BIOS file when it fails or gets corrupted during the updating process. You can

update a corrupted BIOS file using the motherboard support CD that contains the

updated BIOS file.

Prepare the motherboard support CD containing the updated motherboard BIOS

before using this utility.

Recovering.the.BIOS.from.the.support.CD

To recover the BIOS from the support CD:

1. Remove any floppy disk from the floppy disk drive, then turn on the system.

2. Insert the support CD to the optical drive.

3. The utility displays the following message and automatically checks the floppy

disk for the original or updated BIOS file.

4. Restart the system after the utility completes the updating process.

Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
Floppy not found!
Checking for CD-ROM...
CD-ROM found!
Reading file “I8036A0.ROM”. Completed.
Start flashing...

When no floppy disk is found, the utility automatically checks the optical drive

for the original or updated BIOS file. The utility then updates the corrupted

BIOS file.

Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...

DO NOT shut down or reset the system while updating the BIOS! Doing so can

cause system boot failure!

The recovered BIOS may not be the latest BIOS version for this motherboard.

Visit the ASUS website (www.asus.com) to download the latest BIOS file.

Содержание RS120-E4 - 0 MB RAM















































































































































































Результаты поиска

Содержание RS120-E4 - 0 MB RAM

Отзывы:

Asus RS120-E4 - 0 MB RAM, Руководство пользователя, Страница: 72 / 174

Результаты поиска

Содержание RS120-E4 - 0 MB RAM

Отзывы: