Asus RS120-E4 - 0 MB RAM Скачать руководство пользователя страница 145

Страница: 145 / 174

ASUS RS120-E4/PA4

6-39

6.3.8.

Rebuilding.the.RAID

This option is only for the RAID 1, RAID 5 and RAID 10 level.

Rebuilding the RAID with other non-RAID disk:

1. If one member of physical SATA Hard disk within the array is off-line or failed,

the status of array will become to be degraded from normal. The following

displays as:

2. Press <Ctrl-I> to enter the Intel Matrix Storage Manager RAID configuration

utility after POST.

3. If there is available Non-RAID SATA Hard Disk, the utility will prompt

the windows for rebuilding the RAID. Press <Enter> to select the port of

destination disk for rebuilding or press <ESC> to exit

The size of destination disk for rebuilding should be the same or bigger as the

original hard disk.

Содержание RS120-E4 - 0 MB RAM















































































































































































Результаты поиска

Содержание RS120-E4 - 0 MB RAM

Отзывы:

Asus RS120-E4 - 0 MB RAM, Руководство пользователя, Страница: 145 / 174

Результаты поиска

Содержание RS120-E4 - 0 MB RAM

Отзывы: