Asus ROG STRIX Z490-F GAMING, Руководство по биосу

Страница: 33 / 76

ROG STRIX Z490-F BIOS Manual 33
Long Duration Package Power Limit
An Intel parameter known as “power limit” and specified in Watts. The defualt value is
defined by TDP of the processor. Increasing the value will allow the Turbo ratio to be
maintained for a longer duration under higher current loads. Use the <+> and <-> keys
to adjust the value.
Configuration options: [Auto] [1] - [4095]
Package Power Time Window
An Intel parameter of “power limit 1” and specified in seconds. The applied value
indicates how long the Turbo ratio can be active when TDP is exceeded.
Configuration options: [Auto] [1] - [448]
Short Duration Package Power Limit
An Intel parameter known as “power limit 2” and specified in Watts. It is the second
Intel power limit which provides protection when package power exceeds power limit
1. The default setting is 1.25 times power limit 1. According to Intel, the platform must
support this value for up to 10msec when power consumption exceeds power limit
2. ASUS motherboards are engineered to support this duration for a longer time as
required to facilitate overclocking. Use the <+> and <-> keys to adjust the value.
Configuration options: [Auto] [1] - [4095]
IA AC Load Line
This item allows you to set the AC loadline defined in 1/100 mOhms. Use the <+> and
<-> keys to adjust the value.
Configuration options: [Auto] [0.01] - [62.49]
IA DC Load Line
This item allows you to set the DC loadline defined in 1/100 mOhms. Use the <+> and
<-> keys to adjust the value.
Configuration options: [Auto] [0.01] - [62.49]
TVB Voltage Optimizations
This item controls thermal based voltage optimizations for processors that implement
the Intel Thermal Velocity Boost (TVB) feature.
Configuration options: [Auto] [Enabled] [Disabled]
TVB Ratio Clipping
This service controls Core frequency reduction caused by high package temperatures
for processors that implement the Intel Thermal Velocity Boost (TVB) feature. It is
required to be disabled for supporting overclocking at frequencies higher than the
default max turbo frequency. Uses Overclocking Mailbox command 0x18/0x19.
Configuration options: [Auto] [Enabled] [Disabled]
V-Max Stress
If this item is set to [Enabled] , Frequency may be clipped if the max voltage on the
silicon is too high. Frequency will not be clipped if disabled.
Configuration options: [Auto] [Enabled] [Disabled]
V/F Point Offset
Offset Mode Sign 1-8
Configuration options: [+] [-]
V/F Point 1-8 Offset
Configuration options: [Auto] [0.001] - [0.999]