1-2
Chapter 1: Product introduction
Chassis fan connector (4-pin CHA_FAN)
Connect the fan cable to the fan connector on the motherboard, ensuring that the
black wire of the cable matches the ground pin of the connector.
Do not forget to connect the fan cable to the fan connector. Insufficient air flow inside
the system may damage the motherboard components. This is not a jumper! Do not
place a jumper cap on the fan connector!
Intel
®
Celeron
®
Dual-core Processor J4005
This motherboard comes with an onboard Intel
®
Celeron
®
Dual-core processor J4005.
M.2 socket, E Key
This socket allows you to install E key and type
2230 Wi-Fi/BT devices
.
ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation
and push down firmly until the connectors completely fit.
•
For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides
a minimum power of 350 W.
•
DO NOT forget to connect the 4-pin ATX +12V power plug. Otherwise, the system
will not boot up.
•
We recommend that you use a PSU with higher power output when configuring a
system with more power-consuming devices or when you intend to install additional
devices. The system may become unstable or may not boot up if the power is
inadequate.
•
If you are uncertain about the minimum power supply requirement for your system,
refer to the Recommended Power Supply Wattage Calculator at http://support.
asus.com.cn/PowerSupply.aspx?SLanguage=en for details.
M.2 socket 3
This socket allows you to install M.2 (NGFF) SSD modules.
M.2(SOCKET3)
This socket supports M Key and type 2260/2280 storage devices.
