Asus PIKE 1078 Скачать руководство пользователя страница 56

Страница: 56 / 80

2-42

Chapter 2: RAID configuration

2.3

MegaRAID Storage Manager

MegaRAID Storage Manager software enables you to configure, monitor, and

maintain storage configurations on LSI SAS controllers. The MegaRAID Storage

Manager graphical user interface (GUI) makes it easy for you to create and

manage storage configurations.

2.3.1

Hardware and Software Requirements

The hardware requirements for MegaRAID Storage Manager software are as

follows:
• PC-compatible computer with an IA-32 (32-bit) Intel Architecture processor or

an EM64T (64-bit) processor and at least 128 Mbytes of system memory (256

Mbytes recommended)

• Disk drive with at least 50 Mbytes available free space
The supported operating systems for the MegaRAID Storage Manager software

are as follows:
• Microsoft Windows 2000, Microsoft Windows Server 2003, Microsoft Windows

XP, and Microsoft Windows Vista

• Red Hat Linux 3.0, 4.0, or 5.0
• SUSE SLES 9 and 10, with latest updates and service packs
Refer to your server documentation and to the operating system documentation for

more information on hardware and operating system requirements.

2.3.2

Installing MegaRAID Storage Manager Sofware on

Microsoft Windows OS

Follow these steps if you need to install MegaRAID Storage Manager software on

a system running Microsoft Windows OS:

1. Insert the MegaRAID Storage Manager software installation CD in the CD-

ROM drive.

If necessary, find and double-click the setup.exe file to start the installation

program.

2. When the Welcome screen appears, click

Next

If MegaRAID Storage Manager software is already installed on this system,

the Program Maintenance screen appears. Read the screen text and select

Modify

Repair

, or

Remove

3. When the next screen appears, read and accept the user license, and click

Next

The Customer Information screen appears, as shown in the following figure.

Содержание PIKE 1078

















































































Результаты поиска

Содержание PIKE 1078

Отзывы:

Похожие инструкции для PIKE 1078

Бренды по названию

Популярные бренды

Asus PIKE 1078, Руководство пользователя

Результаты поиска

Содержание PIKE 1078

Отзывы:

Похожие инструкции для PIKE 1078

Бренды по названию

Популярные бренды