Asus PEM-FDR, Руководство пользователя

Страница: 10 / 24

1-4
Chapter 1: Product introduction
1.5 Replacing the card bracket
The ASUS PEM-FDR card is bundled with a full-heigth bracket, a low-profile bracket, and
an ASUS proprietary bracket. By default, the card is pre-installed with an ASUS proprietary
bracket.
The proprietray bracket is a small bracket for node that supports ASUS Z10PH-D16 series,
ES4000 G3 series, and RS720Q-E8 series models. The supported list of models are
subject to change without prior notice.
To replace the card bracket:
1. Get the
PEM-FDR card and place it on a stable and flat surface. Ensure that the
printed circuit board (PCB) is facing down.
2. Remove the two screws that secures the PEM-FDR card to the card bracket then
remove the card bracket.
3. Get the replacement card bracket.
4. Align and insert the PEM-FDR card into the mounting hole of the card bracket. Ensure
that the screw holes on the PEM-FDR card matches the screw holes of the card
bracket.
5. Replace the screws that you removed earlier in step 2.
screw
screw
replacement card bracket
default card bracket
screw
screw