Asus PE400D Series Скачать руководство пользователя страница 12

Страница: 12 / 74

PE400D Series

LTE Wireless antenna jack

The LTE wireless antenna jack allows you to connect a

wireless antenna for LTE signals.

NOTE:

The LTE wireless antenna is optional and may not

come bundled.

WLAN Wireless antenna jack

The WLAN wireless antenna jack allows you to connect a

wireless antenna for Wi-Fi signals.

NOTE:

The WLAN wireless antenna is optional and may

not come bundled.

Microphone input jack

The microphone input jack is used to connect your Edge

Computer to an external microphone.

Audio output jack

This stereo audio jack is used to connect the system’s audio

out signal to amplified speakers.

Isolated DIO connector

The Isolated Digital Input/Output (DIO) connector provides

electrical isolation (up to 2500 VDC) of digital input and

output signals, which allow micro controllers to detect and

output logic states. The high voltage protection can be used

in industrial level uses. Please refer to the illustration below

for the pin definition of the Isolated DIO connector.

DI0H DI0L DI1H DI1L DI2H DI2L DI3H DI3L

DO0H DO0L DO1H DO1L DO2H DO2L DO3H Do3L

Содержание PE400D Series











































































Результаты поиска

Содержание PE400D Series

Отзывы:

Asus PE400D Series, Руководство пользователя, Страница: 12 / 74

Результаты поиска

Содержание PE400D Series

Отзывы: