Asus PCI-SIU2, Руководство пользователя

Страница: 73 / 78

ASUS PCI-SIU2 User’s Manual 73
Adding the ASUS driver to an existing UnixWare system
1 Once a UnixWare session is established and a command prompt is ready,
type (recall that UnixWare is case sensitive):
• cp /stand/unix /stand/unix.org , press <ENTER>
• pkgadd -d diskette1 , press <ENTER>
2 Select a100 ihv hba from the list of available host drivers, press <ENTER>.
3 If the PCI-SIU2 is intended to be the bootable host adapter, the next
step to updating the driver will require a revision to the a100 file. These
instructions will guide you through changing the current software set-
tings for UnixWare to establish the PCI-SIU2 as the host adapter for
your boot device:
• At the system command prompt, type
• cd /etc/conf/sdevice.d
• Use “vi” or another editor to modify the file a100 by adding a line
• locate the line $version2
• edit the file by adding the line $static immediately following $ver-
sion2.
• Rebuild the UnixWare kernel by completing the following steps at
the command prompt :
• /etc/conf/bin/idbuild -B <ENTER>
• cp /etc/conf/cf.d/unix /stand/unix <ENTER>
• cd / <ENTER>
• shutdown -g0 ( 0 is Zero ) <ENTER>
• Y <ENTER>
4 If the host adapter is NOT intended to be bootable, these instructions
will guide you through changing the current software settings for
UnixWare to establish the PCI-SIU2 as a non-bootable host adapter
for your device:
• At the system command prompt, type
• /etc/conf/bin/idbuild -Ma100 <ENTER>
• cd / <ENTER>
• shutdown -g0 ( 0 is Zero ) <ENTER>
• Y <ENTER>
5 Exit the UnixWare program and reboot your system to initialize the
new device driver to control PCI-SIU2.
12. SCO UnixWare Driver Installation