manualshive.com logo in svg

Asus PCI-DA2100, Руководство пользователя

Поделиться
Скачать
Asus PCI-DA2100 Скачать руководство пользователя страница 57

ASUS PCI-DA2000 Series RAID Controllers Driver Installation

51

4.  NetWare Driver Installation

4.  NetW

are Driver

NetW

ar

e v4.0x/v4.1

4.2.

Installing NetWare V4.0x/v4.1

1

Use ASUS PCI-DA2000 Series BIOS Configuration Utility to disable ISA Mail-
box Emulation mode(default is disabled).  To do this, at system bootup, press
[Ctrl-I], select Configure Card option, then change IO Port Address to DIS-
ABLED.

2

Use ASUS RAID Manager or RS-232 Terminal Interface Operation to config-
ure Logical Drives and SCSI Devices and map them to valid SCSI-IDs/LUNs.
Note that SCSI ID 7 is reserved for the ASUS PCI-DA2000 Series adapter
and thus no logical drives or devices should be mapped to this SCSI ID.

3

For installation of a new server, follow these procedures:

4

If your Netware installation package is a CD-ROM version and the CD-ROM
Drive used to perform the installation is connected to an ASUS PCI-DA2000
Series, make sure the ASUS PCI-DA2000 Series ASPI manager
“I2DOSASP.SYS”, CD-ROM driver “ASPICDRM.SYS”, and Microsoft CD-
ROM extension program “MSCDEX.EXE” are specified in DOS files
CONFIG.SYS and AUTOEXEC.BAT.

5

Plug up to four ASUS PCI-DA2000 Series into host PCI slots then power on.
ASUS PCI-DA2000 Series BIOS will show the following messages on the screen
for each installed ASUS PCI-DA2000 Series:

ASUS PCI-DA2000 Series (PCI-TO-SCSI RAID) BIOS v1.11

PCI Bus # = 00 Device # = 0A Port = E800 IRQ = 11 EDORAM = 4MB  FW=v1.12

!! Press <Ctrl><I> for Configuration Utility, <Q> to Skip !!

6

Make sure the RAID configuration is properly set.  (Refer to section 4 Text
RAID Manager and RS-232 Terminal Interface Operation).

7

Change to sub-directory where the Netware install program locate, then typing
install and press Enter.

Example:

      Assume the CD-ROM is mapped to DOS logical drive D, type the following at

the DOS prompt:

CD D:\NETWARE.40\ENGLISH

install

Содержание PCI-DA2100















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды