manualshive.com logo in svg

Asus PCI-DA2100, Руководство пользователя

Поделиться
Скачать
Asus PCI-DA2100 Скачать руководство пользователя страница 17

ASUS PCI-DA2100 User’s Manual

11

5.1.3. Configure SCSI

If this option is selected, a list of physical SCSI channels will appear.

Select a SCSI channel that you want to configure, then a new dialog box of SCSI
Channel Configuration will appear. The major options are listed as follows.

1. SCSI ID:

Use this option to change SCSI ID of SCSI Channel.

2. Enable SCSI Termination :

Use this option to enable/disable SCSI termination.

3. Configure SCSI Devices:

Use this option to change the low-level SCSI features of SCSI devices.
The supported options are listed as follows.
* Synchronous Transfer Period.
* Maximum Tagged Command Queue.
* SCSI Disconnect.
* SCSI Parity.

5.1.4. Reset to Defaults

If this option is selected, all the configurations are reset to the manufacture’s de-
faults.

5.2.

Color/Monochrome

Switches display mode between color and monochrome.

5. BIOS Configuration Utility

5. BIOS Utility

Configure SCSI

Содержание PCI-DA2100















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды