manualshive.com logo in svg

Asus P9D-E/4L, Руководство пользователя, Страница: 33 / 159

Поделиться
Скачать
Asus P9D-E/4L Скачать руководство пользователя страница 33

ASUS P9D-E/4L

2-13

     

     

     

     

2.3.4 

Installing the CPU heatsink in rack

The Intel

®

 1150 processor requires a specially designed heatsink to ensure optimum thermal 

condition and performance.

1. 

Peel off the sticker on the heatsink metal 
plate and affix the plate to the back of 
the motherboard, matching the standoffs 
to the heatsink screw holes.

2. 

Use a Phillips screwdriver to tighten 
the four heatsink screws using the 
recommended sequence below.

• 

Ensure that the heatsink is not skewed or tilted, otherwise the CPU will overheat.

• 

Do not overtighten the screws. Doing so can damage the CPU.

A

C

B

D

A

C

D

B

• 

Ensure that you use qualified heatsink assembly only.

• 

Ensure that you have applied the thermal interface material to the top of the CPU 
before installing the heatsink and fan. 

Содержание P9D-E/4L
































































































































































Отзывы:

Нет отзывов