manualshive.com logo in svg

Asus P9D-E/4L, Руководство пользователя, Страница: 24 / 159

Поделиться
Скачать
Asus P9D-E/4L Скачать руководство пользователя страница 24

2-4

Chapter 2: Hardware information

     

    

     

    

2.2 

Motherboard overview

Before you install the motherboard, study the configuration of your chassis to ensure that the 
motherboard fits into it.
To optimize the motherboard features, we highly recommend that you install it in an ATX 1.1 
compliant chassis.

2.2.1 

Placement direction

When installing the motherboard, ensure that you place it into the chassis in the correct 
orientation. The edge with external ports goes to the rear part of the chassis as indicated in 
the image below.

2.2.2 

Screw holes

Place nine (9) screws into the holes indicated by circles to secure the motherboard to the 
chassis.

DO NOT overtighten the screws! Doing so can damage the motherboard.

Ensure to unplug the chassis power cord before installing or removing the motherboard. 
Failure to do so can cause you physical injury and damage motherboard components!

Place this side towards 

the rear of the chassis

Содержание P9D-E/4L
































































































































































Отзывы:

Нет отзывов